CNC milling processing, due to its high precision and flexibility, has become the preferred technology for manufacturing non-standard and customized precision parts. Stainless steel, as a corrosion-resistant and high-strength material, is widely used in various industrial fields. This article will provide you with a comprehensive guide on CNC milling processing of stainless steel, helping you optimize the processing procedures and improve product quality.
Characteristics of stainless steel materials and processing difficulties
The characteristics of stainless steel
Stainless steel has high strength, high hardness and excellent corrosion resistance.
Common types of stainless steel such as 304 and 316 have different chemical compositions and performance characteristics.
Processing difficulties
There is a severe tendency for work hardening, and the cutting tool wears out quickly.
Poor thermal conductivity, cutting heat is difficult to dissipate, which easily leads to overheating of the cutting tool.
High viscosity, chips are difficult to be discharged, affecting the quality of the processed surface.
CNC milling machine equipment and tool preparation
Machining Equipment Selection
High-precision CNC milling machines should be selected to ensure machining accuracy and stability.
The equipment should be equipped with a good cooling system to effectively reduce the cutting temperature.
Tool Selection
Hard alloy tools, such as tungsten cobalt (YG) or tungsten titanium cobalt (YT), are recommended.
For machining high-hardness stainless steel, coated tools, such as TiAlN-coated tools, can be used to improve tool wear resistance and cutting performance.
The geometric parameters of the tool should be selected based on the material properties of stainless steel and machining requirements, such as appropriate rake angle, relief angle and cutting edge inclination.
Setting of CNC Milling Process Parameters
Cutting speed
The appropriate cutting speed should be selected based on the grade and hardness of the stainless steel. Generally, the cutting speed for 304 stainless steel is 80 - 120 m/min, and for 316 stainless steel, it is 60 - 100 m/min.
Feed rate
The feed rate should be adjusted according to the cutting depth, tool diameter, and machine performance. Generally, the feed rate is 0.05 - 0.2 mm/tooth.
Cutting depth
The cutting depth should be chosen based on the processing requirements of the part and the rigidity of the tool. During rough machining, the cutting depth can be relatively large, typically 1 - 3 mm; during finish machining, the cutting depth should be smaller, usually 0.1 - 0.5 mm.
Precautions during the processing
Cooling and Lubrication
Use sufficient cooling and lubricating fluid, such as emulsion or cutting oil, to reduce cutting temperature, minimize tool wear, and improve the quality of the machined surface.
Chip Disposal
The chips produced during stainless steel processing are highly adhesive. They should be promptly removed to prevent them from entangling with the tool or workpiece, which could disrupt the normal machining process.
Arrangement of Machining Sequence
Adhere to the principle of "coarse before fine" and rationally arrange the machining sequence to enhance machining efficiency and accuracy.
Tool Wear Monitoring
Regularly inspect the tool wear condition and replace severely worn tools in a timely manner to ensure machining quality and accuracy.

Quality inspection and control
Dimensional accuracy inspection
Dimensional accuracy inspection of machined parts is carried out using measuring tools such as calipers and micrometers to ensure that the parts meet the design requirements.
Surface quality inspection
Surface quality of parts is inspected by visual observation or using a surface roughness tester to check for surface roughness, scratches, burrs, etc.
Geometric tolerance inspection
Geometric tolerances of parts, such as parallelism, perpendicularity, and coaxiality, are inspected using equipment such as a coordinate measuring machine.
How to choose a professional stainless steel processing factory?
Dahong Precision has 9 years of experience in stainless steel parts processing and production, and can provide various complex parts processing services.
Equipment configuration:
✔ CNC machining center (for complex curved surface processing)
✔ CNC turning machining center
✔ Surface treatment services
Quality commitment:
✅ 100% three-dimensional inspection report
✅ Surface roughness guaranteed at Ra0.4μm

Let's Make Something Extraordinary Together
At Dahong Precision, we are more than just a CNC machining supplier, we are your partner in precision manufacturing. Whether you need simple parts or highly complex parts, our 3, 4 and 5 axis CNC machining services deliver the quality and reliability you deserve. Contact us today to discuss your project and find out how we can help you achieve your goals.
