Metal material surface treatment process and technical knowledge

Apr 12, 2025

Leave a message

summarize

                                                                                                                                                                                     

Surface treatment process is the use of modern physics, chemistry, metal science and heat treatment and other disciplines of technology to change the status and properties of the surface of the parts to optimize the combination with the core material to achieve the predetermined performance requirements of the process method, called surface treatment.

 

Surface treatment action:

Improve surface corrosion resistance and wear resistance, slow down, eliminate and repair material surface changes and damage

Make ordinary materials have a special function of the surface

Save energy, reduce costs and improve the environment

 

Surface treatment technology classification:

 

Surface strengthening treatment,Surface cleaning treatment,Surface decoration treatment,Surface anticorrosion treatment,
Surface repair treatment

 

Common surface treatment methods:

Spraying, shot peening, heat treatment, laser surface strengthening, polishing, aluminum anodizing and hard anodizing treatment, various color treatment, ordinary plating (such as: nickel plating, blackening, DLC, QPQ, phosphatization, chrome plating, etc.) For metal parts, we are more commonly used surface treatment methods are: mechanical grinding, chemical treatment, surface heat treatment, spray surface, etc.

 

surface treatment process

 

Surface heat treatment - surface hardening

 

Surface quenching refers to the heat treatment method of strengthening the surface of parts by using rapid heating to austenitize the surface without changing the chemical composition of the steel and the core structure.

 

20250411162331

 

Surface hardening purpose:
Make the surface have high hardness, wear resistance and fatigue limits:
The interior of the parts has sufficient plasticity and toughness under the condition of maintaining a certain strength and hardness. Hard on the outside but tough on the inside.Suitable for parts that withstand bending, torsion, friction and impact.

 

Materials for surface hardening
0.4-0.5%C medium carbon steel. If the carbon content is too low, the surface hardness and wear resistance will decrease. The carbon content is too high, the internal toughness of the material decreases
Cast iron enhances its surface wear resistance.

 

Preliminary heat treatment
Process: tempering or normalizing for structural steel.
The former has high performance and is used for important parts with high requirements, while the latter is used for ordinary parts with low requirements.

 

Purpose:
Tissue preparation for surface quenching; Obtain final cardiac tissue.

 

Tempering after surface hardening
Low temperature tempering, temperature not higher than 200°C
The purpose of tempering is to reduce internal stress and retain high hardness and wear resistance after quenching: surface quenching + low temperature tempering
The surface tissue is M,; The heart is organized as S, (tempered) or F+S(normalized).

 

Common heating methods for surface quenching
Induction heating: The use of alternating current to induce huge eddy currents on the surface of the workpiece, so that the workpiece surface rapidly heating method induction heating is divided into:
High-frequency induction heating: the frequency is 250-300KHz, the depth of the hardening layer is 0.5-2mm
Medium frequency induction heating: the frequency is 2500-8000Hz, the depth of the hardening layer is 2-10mm
Power frequency induction heating: the frequency is 50Hz, the depth of the hardening layer is 10-15mm

 

2

Flame heating

The use of acetylene flame directly heating the workpiece surface method. Low cost, but the quality is not easy to control,

 

Laser heat treatment

The use of high energy density laser to heat the workpiece surface method. High efficiency, good quality.

 

 

Chemical surface heat treatment

Chemical heat treatment is a heat treatment process in which the workpiece is heated and insulated in a specific medium, so that the active atoms in the medium penetrate the surface of the workpiece to change the chemical composition and organization of the surface of the workpiece, and then change its performance.

 

Compared with surface quenching, chemical heat treatment not only changes the surface structure of the steel, but also changes its chemical composition, chemical heat treatment is also one of the methods to obtain the toughness of the surface hard inside. According to the infiltration of different elements, chemical heat treatment can be divided into carburizing, nitriding, multi-component co-infiltration, infiltration of other elements and so on.

 

Commonly used chemical heat treatment:
Carburizing, nitriding (commonly known as nitriding), carbonitriding (commonly known as cyanide and soft nitriding) and other sulfur, boron, aluminum, vanadium, chromium, etc. Phosphating can be classified as surface treatment, not chemical heat treatment. The chemical heat treatment process includes three basic processes: decomposition, absorption and diffusion.

 

The basic process of chemical heat treatment
Decomposition of the medium (infiltration agent) : The decomposition simultaneously releases the active atoms. For example: carburizing CH4→>2H2,+[C] nitriding 2NH3:→3H2,+2[N]
Absorption on the workpiece surface: the active atoms dissolve into the solid solution or form compounds with certain elements in the steel.

 

3

Atoms spread inward
Carburizing of steel: The process of penetrating carbon atoms into the surface of steel.
The purpose of carburizing: to improve the surface hardness, wear resistance and fatigue strength of the workpiece, while maintaining the good toughness of the heart.
Carburizing steel is low carbon steel containing 0.1-0.25%C. High carbon reduces heart toughness.

 

Carburizing method
Gas carburizing method
The workpiece is placed in a sealed furnace and carburized in a high temperature carburizing atmosphere. The permeating agent is gas (gas, liquefied gas, etc.) or organic liquid (kerosene, methanol, etc.)
Advantages: good quality, high efficiency; Disadvantages: The composition and depth of the infiltration layer are not easy to control

 

Solid carburizing method
The workpiece is buried in the permeating agent, the box is sealed, and the carburizing is heated at high temperature.
Advantages: simple operation; Disadvantages: Slow infiltration, poor working conditions.

 

Vacuum carburizing method
The workpiece is put into the vacuum carburizing furnace, and the carburizing gas is heated after vacuuming.
Advantages: Good surface quality, fast carburizing speed.

 

 

The relationship between the thickness of the permeating layer and the holding time during gas carburizing

 

Temperature holding period (h) Penetration thickness (m) Temperature holding period (h) Penetration thickness (m)
temperature(℃) temperature(℃)

850

900 950 1000 850 900 950 1000
1 0.4 0.53 0.74 1.00 9 1.12 1.60 2.23 3.05
2 0.53 0.76 1.04 1.42 10 1.17 1.70 2.36 3.20
3 0.63 0.94 1.30 1.75 11 1.22 1.78 2.46 3.35
4 0.77 1.07 1.50 2.00 12 1.30 1.85 2.50 3.35
5 0.84 1.24 1.68 2.26 13 1.35 1.93 2.61 3.68
6 0.91 1.32 1.83 2.46 14 1.40 2.00 2.77 3.81
7 1.00 1.42 1.98 2.55 15 1.45 2.10 2.81 3.92
8 1.04 1.52 2.11 2.80 16 1.50 2.13 2.87 4.06

 

 

 

Carburizing temperature: 900-950'C
Carburizing layer thickness:
(Thickness from the surface to half of the excessive layer): generally 0.5-2mm.
Carbon content on the surface of the carburizing layer: 0.85-1.05 is the best.
After carburizing and slow cooling, the surface layer was P+ network Fe3CⅡ; The heart is F+P; The middle is the transition zone.

5
6

Heat treatment after carburizing:Quenching + low temperature tempering, tempering temperature is 160-180C.

Quenching methods are:

(1) Pre-cooling quenching method
Direct quenching after carburizing by pre-cooling to a temperature slightly above Ar₁ temperature.

(2) One quenching method:
That is, after carburizing and slow cooling, re-heating and quenching.

(3) Secondary quenching method:

That is, after carburizing and slow cooling, the first heating is Ac3+30-50℃ in the heart to refine the heart Ministry; The second heating is Ac1+30-50℃ to refine the surface layer.
The common method is to reheat to Ac1+30-50℃quenching + low temperature tempering after carburizing slow cooling.

 

The nitriding of steel
Nitriding is the process of infiltration of nitrogen atoms into the surface of the steel.
(1) nitriding steel
It is medium carbon steel containing Cr, Mo, Al, Ti and V.
The common steel number is 38CrMoAl.
(2) The nitriding temperature is 500-570℃
The thickness of the nitriding layer shall not exceed 0.6-0.7mm.
(3) Commonly used nitriding methods
Gas nitriding and ion nitriding.
The gas nitriding process is similar to the gas carburizing process in that the cementing agent is ammonia.

 

Ion nitriding method is to make ionized nitrogen ions impact the workpiece as cathode at high speed under the action of electric field. Compared with gas nitriding, the nitriding time is shorter and the nitriding layer is less brittle.

 

(4) Characteristics and applications of nitriding
High surface hardness of nitriding parts,(69~72HRC), high wear resistance.,High fatigue strength.,Due to compressive stress on the surface.

 

(5) The workpiece deformation is small
The reason is that the nitriding temperature is low, and no heat treatment is required after nitriding.
(6) Good corrosion resistance.
Because the nitrides formed on the surface are chemically stable.
Disadvantages of nitriding: complex process, high cost, thin nitriding layer.
It is used for parts with high wear resistance, high precision and heat resistance, wear resistance and corrosion resistance. Such as instrument small shaft, light load gear
And important crankshaft.

 

 

Comparing nitriding with carburizing

 

 The hardness and wear resistance of nitriding layer are higher than that of carburizing layer, and the hardness can reach 69~72HRC, and it is still high temperature at 600~650℃ Can maintain high hardness;

 The nitriding layer has high fatigue resistance and corrosion resistance.

  No heat treatment is required after nitriding, which can avoid deformation and other defects caused by heat treatment;

 The nitriding temperature is low.

 It is only suitable for medium carbon alloy steel, which requires a long process time to achieve the required nitriding layer.

 

 

Surface deformation strengthening

 

Surface coating strengthening is a surface strengthening process in which one or more layers of other metals or non-metals are coated on a metal surface by physical or chemical methods.
Objective: To improve the wear resistance, corrosion resistance and heat resistance of steel parts or to decorate the surface.

 

Metal spraying technology
The process of heating the metal powder to a molten or semi-molten state, atomizing it with high pressure air flow and spraying it on the surface of the workpiece to form a coating is called thermal spraying.

 The use of thermal spraying technology can improve the wear resistance, corrosion resistance, heat resistance and insulation of the material.
 It is widely used in almost all fields including aerospace, mechanical equipment, electronics industry and so on.

 

Metal coating
Coating one or more layers of metal coating on the surface of the base material can significantly improve its wear resistance, corrosion resistance and heat resistance, or obtain other special properties.
Electroplating: The workpiece acts as the cathode

 

Electroless plating: The surface strengthening method of depositing a layer of metal on the catalytic film on the surface of the substrate material by chemical reduction without external power supply.

 

Features: Uniform thickness coating can also be obtained on the complex shape workpiece; The grain of the coating is small and dense, and the pores and cracks are few. A metallic layer can be deposited on the surface of a non-metallic material.

 

Composite plating: Adding an appropriate amount of metal or non-metal particles into the solution of electroplating or electroless plating, with the help of strong agitation and uniform deposition of the matrix metal together to obtain the surface strengthening method of coating with special properties.

 

Metal carbide coating ~ vapor deposition method

Vapor deposition technology refers to a new type of coating technology in which vapor substances containing deposited elements are deposited on the surface of materials by physical or chemical methods to form thin films.

 

According to the different principles of the deposition process, vapor deposition technology can be divided into physical vapor deposition (PVD) and chemical vapor deposition (CVD) two categories.

 

Physical Vapor Deposition (PVD)
Physical vapor deposition refers to the technology of vaporizing materials into atoms, molecules or ionized ions by physical methods under vacuum conditions, and depositating a thin film on the surface of materials through the vapor phase process. Physical deposition technology mainly includes vacuum evaporation, sputtering, ion plating three basic methods.
Vacuum evaporation is the method of vaporizing the film-forming material to vaporize or sublimate it to deposit on the surface of the workpiece to form a film.

 

vacuum evaporation

 

Sputtering is a method of ionizing argon gas by glow discharge under vacuum and depositing the sputtered particles on the workpiece surface by accelerating the bombardment of argon ion under the action of electric field.

 

Ion plating is a method of partially ionizing evaporated atoms into ions by using gas discharge technology under vacuum, and depositing a large number of high-energy neutral particles on the surface of the workpiece to form a film. Physical vapor deposition has a wide range of applicable matrix materials and membrane materials; Simple process, save materials, no pollution; The obtained film layer has the advantages of strong adhesion, uniform film thickness, compact film layer and few pinholes. Widely used in machinery, aerospace, electronics, optics and light industry and other fields to prepare wear-resistant, corrosion-resistant, heat-resistant, conductive, insulating, optical, magnetic, piezoelectric, smooth, superconducting and other films.

 

Chemical Vapor Deposition (CVD)

 

Chemical vapor deposition (CVD) is a method of forming a metal or compound film on the substrate surface by the interaction of mixed gas with the substrate surface at a certain temperature.
For example, the gaseous TiCL reacts with N and H on the surface of the heated steel to form TiN, which is deposited on the surface of the steel to form a wear-resistant and corrosion-resistant sedimentary layer.
Because chemical vapor deposition film has good wear resistance, corrosion resistance, heat resistance and electrical, optical and other special properties, it has been widely used in machinery manufacturing, aerospace, transportation, coal chemical industry and other industrial fields.

 

 

surface treatment technology

 

 

Thermal spraying


Principle: Thermal spraying is to melt metal or non-metal materials by heating, by continuous blowing of compressed gas to the surface of the parts, the formation of a coating firmly combined with the matrix, from the surface of the parts to obtain the required physical and chemical properties.

Powder-flame spraying diagram

 

 

Instructions:
① The spraying heat source can be gas flame, electric arc, plasma arc or laser beam;
② Spraying materials can be metals, alloys, metal oxides and carbides, ceramics and plastics, etc. The material form can be wire, bar or powder.
③ The spray matrix can be solid materials such as metal, ceramic, glass, plastic, gypsum, wood, cloth, paper and so on.
④ The coating thickness of the spray is tens of microns to several millimeters.

 

Characteristics of thermal spraying:
① Flexible process, wide range of application. Thermal spraying construction objects can be large or small, small to φ10mm inner hole (line explosion spraying), large to Bridges, iron towers (flame wire spraying or arc spraying), can be sprayed indoors, can also be operated in the field; It can be sprayed in whole or in part.
② The matrix and spraying materials are extensive. Various physical and chemical properties of the workpiece surface can be obtained by spraying different materials.
③ The workpiece stress deformation is small. The matrix can maintain a low temperature, and the stress deformation of the workpiece is small. 4) The production efficiency is high. The weight of the spray material per hour is from a few kilograms to tens of kilograms, and the deposition efficiency is very high.

 

Applications of thermal spraying:
① Anti-corrosion: mainly used for large-scale sluice steel gates, paper machine drying cylinder, coal mine underground steel structure, high voltage transmission tower TV antenna, large steel Bridges, chemical plant tanks and pipelines anti-corrosion spraying.
②Anti-wear: repair the worn parts by spraying, or spray wear-resistant materials on the parts easy to wear, such as fan spindle, blast furnace tuyere, automobile crankshaft, machine tool spindle, machine guide rail, diesel engine cylinder liner, oilfield drill pipe, agricultural machinery blade, etc
③ Special functional layer: Some special properties of the surface layer are obtained by spraying, such as high temperature resistance, heat insulation, conductivity, insulation, anti-radiation, etc., which are widely used in aerospace, automotive parts, electronic equipment, mechanical equipment and so on.

 

shot blasting

 

Shot peening is a process which uses sand pellets and iron pellets sprayed at high speed to impact the surface of the workpiece in order to improve the mechanical properties of parts and change the surface state.

 

shot blasting

 

 

There are usually two methods of shot peening: manual operation and mechanical operation

 

 Shot peening is usually sand or iron pellets with a diameter of 0.5~2mm. The material of sand grains is mostly A1203 or Si02. The effect of surface treatment is related to the size of the pellet, spraying speed and duration.
 Shot peening is used to improve the mechanical strength and wear resistance, fatigue resistance and corrosion resistance of parts, and can also be used for surface matting to remove oxidation skin and eliminate the residual stress of casting, forging and welding parts.

 

ion plating

 

Ion plating is to vaporize and ionize the coating material into ions, which are deposited on the surface of the parts through diffusion and electric field, and form a coating layer that is firmly bonded with the substrate to meet the required properties.

 

 There are many types of ion plating. Its diffraction property is very good, can be plated on the surface of all directions of the parts, can be plated on metal or non-metal surface metal or alloy, the coating thickness is generally 2 ~3mm.

 Ion plating has been widely used in machinery, electronics, aviation, aerospace light industry, optics and construction departments, to prepare wear and corrosion resistance, heat resistance, superhard, conductive, magnetic and photoelectric conversion Equal coating.

 

laser facial treatment

Laser surface strengthening (high frequency wave, laser high frequency wave) is to use a focused laser beam to the surface of the steel, in a very short time to heat the workpiece surface of the extremely thin material to the phase change temperature or melting point above the temperature, and in a very short time to cool, so that the workpiece surface hardening and strengthening.

 Laser surface strengthening can be divided into laser phase transformation strengthening treatment, laser surface alloying treatment and laser cladding treatment.

 Laser surface enhancement has small heat affected zone, small deformation, clean workpiece surface and easy operation.

 The depth of the hardened layer strengthened by the laser surface is relatively shallow, generally 0.3~0.5mm.

 Laser surface strengthening is mainly used for locally strengthened parts, such as punching die, crankshaft, CAM, camshaft, spline shaft, precision instrument guide rail, high-speed steel tool, gear and internal combustion engine cylinder liner..

Laser high frequency

 

polishing

Polishing is a finishing processing method to modify the surface of the parts, generally can only get a smooth surface, can not improve or even maintain the original processing accuracy, with different pre-processing conditions, the Ra value after polishing can reach 1.6~ 0.008um.

 

classification

 

machine glazed finish

Wheel polishing: The high-speed rotating flexible polishing wheel and extremely fine abrasive are used to roll and micro-cut the workpiece surface to achieve polishing. The polishing wheel is made of multiple layers of canvas, felt or leather and is used for polishing larger parts.

 

Roller polishing and vibration polishing:
The workpiece, abrasive and polishing liquid into the drum or vibration box, the drum rolls slowly or vibration box vibration, so that the workpiece and the workpiece, the workpiece and the abrasive friction, coupled with the chemical action of the polishing liquid, remove the oil on the surface of the workpiece, rust layer grinding to remove the convex peak, so as to obtain a smooth surface. For the polishing of small and large parts, the latter has higher productivity and better polishing effect than the former.

 

chemical polishing

The metal parts are immersed in a special chemical solution, and the surface of the parts is polished by using the phenomenon that the raised part of the metal surface dissolves faster than the concave part.

 

electrochemical polishing

Electrochemical polishing is similar to chemical polishing, the difference is that the direct current is also passed, the workpiece is connected to the positive newspaper, resulting in anode dissolution, but also the use of the metal surface of the convex part than the concave part of the dissolution speed of the phenomenon of polishing.

 

electroplate

 

Electroplating is an electrochemical and REDOX process. Take nickel plating as an example; The metal parts are immersed in the solution of metal salt (NiSO4) as the cathode, and the metal nickel plate as the anode. After DC power supply is switched on, the metal nickel plating layer will be deposited on the parts.

 

galvanize
The main function of galvanized steel parts is to prevent corrosion, and the amount accounts for 1/3 to 1/2 of all electroplated parts, which is the largest plating species in all electroplated varieties. Galvanized has the advantages of low cost, good corrosion resistance, beautiful appearance and storage, and is widely used in light industry, mechanical and electrical, agricultural machinery and national defense industries.

 

Copper plating
Copper plating is often used as an intermediate layer of other coatings to improve the binding force of the surface coating and the base metal. In the power industry, thick copper plating can also be used to replace pure copper wires to reduce copper consumption.

 

Nickel plating
Nickel plating has a wide range of applications, which can be used for both decorative and functional protection. The former is mainly used for protective decorative coating of bicycles, watches, household appliances, hardware products, cars, cameras and other parts; The latter is mainly used for repair plating of easily worn products.

 

Chrome plating
Chromium can maintain luster in the atmosphere for a long time, does not react in lye, nitric acid, sulfuric acid and many organic acids, chromium plating layer has a high hardness and excellent wear resistance and low friction coefficient, so chromium plating is often used to protect decorative coating, to prevent rust and beautify the appearance of the base metal, but also often used to improve the wear resistance of products or repair wear.

 

 

Blackening of steel
Black and blue is a kind of oxidation treatment of steel parts, so that its surface generates an extremely thin Fe304 oxide film. Commonly used alkaline chemical solution oxidation method: with aqueous solution of sodium hydroxide and sodium nitrite, treated at 135~145℃C temperature for 60~90min, and then soaked in soap for 3~5min, and finally washed, dried and immersed in oil. It is bluish-black and dark black after blackening, which can improve the corrosion resistance and lubricity of the parts and improve the appearance.

 

Phosphating of steel

Phosphating is the treatment of iron and steel parts in phosphating solution, deposited on the surface to form a layer of water-insoluble crystalline phosphate film. Commonly used phosphating solution is an acidic dilute solution composed of zinc dihydrogen phosphate or iron dihydrogen phosphate and manganese dihydrogen phosphate. Treatment at 90~98°C for 8~20min.
After phosphating is gray or gray-black, its corrosion resistance is better than blue, but the appearance is not as good as blue. Phosphating is mainly used for corrosion protection of steel parts (such as guns) and paint pretreatment to increase the adhesion and protection of paint film and steel workpiece.

 

Anodizing and coloring of aluminum

 

Anodizing is to immerse aluminum or aluminum alloy parts in acidic electrolyte, and form an anticorrosive oxidation film firmly bonded with the substrate on the surface of the parts under the action of external current.
Before anodizing, it should be pre-treated by polishing, oil removal, cleaning, etc., and then it should be washed, colored and sealed.
Anodized oxide film can be dyed black, red, blue, green, gold and brown and other anodizing and coloring treatment is often used in automotive, electronic industry and other parts processing.

 

Anodizing

 

modular-1
DaHong-Machining

Bring Your Designs toReality- ExperienceCustom Perfection withOn-Demand CNCMachining!

 

 

 

Send Inquiry