The difference between CNC machining accuracy and precision

Sep 18, 2024

Leave a message

Most of the time, when people say something is very accurate or has a high level of precision, their meaning is the same. In everyday language, precision and accuracy are relatively interchangeable.
However, from a scientific or technological perspective, accuracy and precision actually refer to two different qualities. This article discusses the difference between accuracy and precision, and explains how they are applied to CNC machining.
What is accuracy?
The scientific definition of accuracy is:
A description of the degree of approximation between measured values and theoretically correct values.
In other words, scientists and engineers use accuracy to display the degree of match between a single measurement and its true, acceptable, or target value.
The classic example used to explain accuracy and precision is the bullseye target. Accuracy refers to the degree to which any measured value is close to the center of the target (desired value).
Any value that approaches the expected or true value is considered relatively accurate, regardless of whether they are located above, below, or on both sides of the center. The important quality of accuracy is approaching the correct value.
What is precision?
The scientific definition of precision is:
A description of the degree to which a set of measured values matches each other.
Precision refers to the range of variance in a dataset or the distribution between data points.
In the bullseye example, if multiple measurements are clustered below the center of the bullseye, they are an accurate dataset. However, as they are not near the center of the bullseye, they are not very accurate.
But if the measured values are concentrated at the center of the target, we can say that they are both accurate and precise.
Accuracy and precision in CNC machining
Although the bullseye example is popular, it is difficult to understand its relationship with manufacturing and manufacturing applications. The difference between machining accuracy and precision is related to the degree of matching between a batch of parts and CAD models or design blueprints.
High precision CNC machining equipment can produce parts that match the design model very well. For example, suppose the part design requires machining a pair of 0.50 inch wide x 5.00 inch long grooves on its surface, with a groove spacing of 2.0 inches.
When quality experts inspect individual finished parts, they measure that the half inch groove is actually cut into a length of 5.05 inches, and the spacing between them is only 1.96 inches. The job of a quality expert is to determine whether the machined parts accurately represent the design model. Whether the part will be rejected will depend on the allowable tolerances built into the design.
If we manufacture and measure a batch of 100 or 1000 such machined parts, we can evaluate the accuracy of CNC equipment. High precision CNC machinery will exhibit a high degree of reproducibility, with values displayed through repeated measurements always approaching the true model.
Summary of Accuracy and Precision
From a processing perspective, precision reflects the degree of matching between the manufactured part and the design model, while precision shows the repeatability of creating the part over and over again.

Send Inquiry