In the field of mechanical processing, the turning process of parts is often accompanied by the generation of chips. These chips not only affect machining efficiency, but also directly affect the quality of the machined surface and the durability of the cutting tool. Today we will delve into the characteristics of chips generated during the turning process of parts.
1, Types of chips and their formation conditions
In the process of turning parts, according to the morphological characteristics of chips, we can divide them into four categories: strip-shaped chips, nodular chips, granular chips, and crushed chips.
Belt shaped chips: The chips present a continuous belt or spiral shape, with a relatively smooth surface, a smooth cutting process, and small fluctuations in cutting force. The main conditions for forming strip-shaped chips are high cutting speed, thin cutting thickness, good plasticity of the workpiece material, and large tool rake angle. This chip morphology is very advantageous for improving processing efficiency and reducing surface roughness.
Segmented chips: The chips appear continuous, but there are cracks on the upper surface and both sides, and the bottom layer is connected. The formation conditions of segmental chips are low cutting speed, large cutting thickness, good plasticity of the workpiece material, and small tool rake angle. Compared to ribbon chips, the cutting force fluctuation of chip like chips is greater, and the surface roughness of the processed chips is also poorer.
Granular chips: The chips appear as separated particles, formed because the shear stress on the entire final cutting surface reaches the fracture strength of the workpiece material, and cracks penetrate the cross-section of the chips. Granular chips are relatively rare and usually appear when cutting coarse-grained metals at low speeds with small rake angle tools.
Fragmented chips: The chips are irregularly shaped and formed because the plastic deformation of the workpiece is extremely small when cutting brittle metals. After the cutting layer material is in an elastic deformation state or undergoes small plastic deformation, the internal stress reaches the fracture strength of the material, thereby fragmenting into chips. The fragmentation of chips is detrimental to the surface roughness and tool durability during machining.
2, Factors affecting chip deformation
The degree of deformation of chips is influenced by various factors, including the strength, hardness, plasticity of the workpiece material, tool rake angle size, cutting speed, cutting thickness, and the use of cutting fluid. Understanding the impact of these factors on chip deformation can help us optimize cutting conditions and improve machining quality.
3, Optimizing cutting conditions to reduce the impact of chips on machining
We can reduce the impact of different types of chips on machining by adjusting cutting conditions. For example, when generating strip-shaped chips, the machining effect can be optimized by increasing the cutting speed and reducing the cutting thickness; When generating nodular chips, cutting smoothness can be improved by appropriately reducing cutting speed and increasing cutting thickness.
