As a non-standard auto parts manufacturer focusing on the Japanese market, we take ±0.005mm ultra-precision machining, simple parts 1 day, complex parts 7 days emergency delivery cycle, 100% environmental compliance materials as our core competitiveness, to provide the next generation of electric and intelligent parts customization services for many Japanese auto suppliers.

Six core technologies revolutionize custom auto parts manufacturing
1. Advanced five-axis CNC machining solutions
Five axis CNC center
Up to ±0.005 mm precision complex geometry
Cycle time is 40% faster than traditional processing
Material expertise:
Aluminum alloy: A6061-T6 / A7075-T651 (JIS H 4040 standard)
Stainless steel: SUS304/SUS316 (JIS G 4303 standard)
Tool steel: S45C(JIS G 4051)/SKD11 (JIS G 4404)
2. Intelligent CNC turning system
Common turning and CNC turning with flexible capabilities
3. Complete surface treatment scheme
Anodizing (according to JIS H 8601)
Electroless nickel plating (10-50μm thickness control)
Passivation treatment, corrosion resistance
Chrome plating, Diamond like Coating (DLC), Teflon, blackening and other surface treatment services
4. Quality assurance system in accordance with jis standards
Material certification:
XRF (X-ray Fluorescence Spectrometer) verification
Fully compliant with JIS G/JIS H standards
Dimension control:
Coordinate Measuring machine (CMM) calibrated to JIS B 7440
The GD&T analysis standard is JIS B 0021-2023
5. Integrated manufacturing process
Material Procurement → Precision machining → Surface treatment →JIS certification → Logistics
From technical drawings to finished products one-stop service
6. JIS standard compliance guarantee
Strictly observe:
▶︎JIS B 0401 (dimensional tolerance)
▶︎JIS D 0203 (Corrosion resistance test)
▶︎JIS Z 2241 (hardness test method)
CNC turning of auto parts
CNC turning technology with high precision, high efficiency and complex contour processing capabilities, has become a key process in the production of automotive core components. The following system classifies the typical automotive parts it can process:

Power system core components
Crankshaft and camshaft
Material: JIS SCM440 (42CrMo4), forged steel
Accuracy requirements: journal roundness ≤0.005mm, surface roughness Ra0.4μm
Process highlights:
▶ Double spindle turning center realizes front and back simultaneous processing
▶ Online measurement system real-time compensation of thermal deformation
Turbocharger blade shaft
Material: Inconel 718 superalloy
Processing difficulties:
▶ Machining of slender shaft with depth to diameter ratio > 8:1
▶ Dynamic Balance Rating G2.5 (ISO 1940-1)
Transmission and chassis components
| Part type | ideal format | Special process requirements |
| change gear shaft | Involute spline (DIN 5480) | Hard turning (HRC58 or above) |
| hub unit | Conical raceway (Angle tolerance ±0.02°) | CBN tool continuous cutting |
| Steering pull rod head | M24×1.5 thread (JIS B 0205) | Diameter error of thread < 0.01mm |
Case: New energy vehicle differential planetary gear
Material: 20CrMnTiH (carburized and quenched to HRC60-64)
Processing scheme:
✅ Swiss type walking machine complete turning + groove milling with one clamping
✅ Module 1.5 gear accuracy up to JIS B 1702-2 class
Fuel and electronic control system precision parts

High pressure common rail nozzle
Key features:
▶ Micron jet hole (φ0.12mm±0.002mm)
▶ Cone sealing Angle 60°±0.1°
Test standard:
✅ Flow consistency deviation < 1.5% (ISO 2697)
✅ 50MPa pressure test zero leakage
Electronic control unit (ECU) housing
Material: 6061-T6 aluminum alloy (JIS H 4040)
Process combination:
▶ Integrated turning contour + drilling and tapping
▶ EMI shielding coating (nickel plating thickness 8-12μm)
Exclusive parts for new energy vehicles

Motor shaft
Innovative design:
▶ Hollow cooling channel (wall thickness 2.5mm±0.1mm)
▶ Permanent magnet installation slot symmetry ≤0.015mm
Material Trends:
⚡ Carbon fiber composite (CFRP) mixed with metal turning
Battery connection terminal
Electrical conductivity requirements:
▶ Surface roughness Ra0.8μm or less (reduce contact resistance)
▶ Copper alloy (C18150) turning parameters:
Speed: 1500rpm
Feed: 0.1mm/rev
Tool: PCD tip radius 0.2mm
Mastering the precise application of CNC turning in auto parts manufacturing can significantly improve product performance and reduce comprehensive costs, especially in the field of new energy vehicles and intelligent driving components, and its technical advantages will become more prominent.

Custom extraordinary auto parts
