The selection of materials is crucial when CNC machining medical parts. Medical components must meet strict standards for biocompatibility, durability, and precision. Choosing appropriate materials can ensure safety, performance, and compliance with industry regulations such as ISO 13485 and FDA requirements. From the smallest surgical instruments to complex prosthetics and diagnostic equipment, medical devices require high precision. The human body is a complex system, and any deviation in the size or quality of medical components can have serious consequences.
CNC machining of medical parts has high-precision control: it can achieve a tolerance of ± 0.005mm to ensure the compatibility of parts, process various metal and plastic materials, and meet various medical needs
In non-standard parts of medical equipment, metal materials such as stainless steel and titanium alloys provide high strength, corrosion resistance, and precise mechanical properties, supporting long-term stable operation and complex working condition tolerance of key components such as implants and surgical instruments; Simultaneously, biocompatibility treatment (such as surface passivation, oxidation) is carried out The following are the most common and suitable materials for CNC customized medical parts:
stainless steel

Stainless steel is widely used in the medical industry for surgical instruments, orthopedic implants, and dental tools due to its excellent strength, corrosion resistance, and sterilization compatibility.
Advantages: High strength and durability, corrosion resistance and oxidation resistance, very suitable for surgical tools and implants, good processability and cost-effectiveness, high biocompatibility, suitable for temporary implantation or surgical instruments
Common models: AISI303,316L,304,17-4PH
steel
In non-standard parts of medical equipment, steel (such as high carbon steel and spring steel) is commonly used for high load mechanical components that do not directly contact the human body (such as equipment support frames, transmission gears, or spring elements) due to its ultra-high strength and wear resistance. Surface coating or coating treatment (such as nickel plating, PTFE) is used to compensate for the insufficient corrosion resistance and meet the functional requirements under specific working conditions.
Common models: CR1018,4140HT,AISI A2
titanium

Titanium is one of the best materials for CNC machining of medical implants, such as bone screws, hip and knee replacements, and dental implants.
Advantages: Excellent biocompatibility, suitable for long-term implantation in the body, no reaction with body fluids
Lightweight yet sturdy, non-toxic, non-magnetic, excellent corrosion resistance, high strength to weight ratio
Orthopedic surgery requires the use of titanium and its alloys, especially in surgeries involving limb and skull reconstruction. These materials are used to produce a range of internal fixation devices, such as artificial joints, skull and dura implants, teeth, braces, and crowns.
Common models: Ti-6Al-4V(Grade 5), Pure Titanium (Grade 2)
Application areas:
Dental implants, artificial joints, bone plates and screws
Cardiac stents, surgical implants
Neurosurgery and plastic surgery components
In addition, cobalt alloys are more suitable for manufacturing long-term implants exposed to heavy internal load conditions. They are commonly used in the manufacture of artificial hip and knee joints, joint fasteners, bone plates, nails, and pins.
aluminum alloy

Although aluminum is generally not used for implants, it is an ideal choice for lightweight medical device casings, electronic casings, and surgical tool prototypes.
Advantages: Easy to process, cost-effective prototyping, good thermal and electrical conductivity, corrosion resistance (during anodizing), lightweight and high-strength, suitable for portable medical devices, relatively low cost, suitable for non implantable devices
Common models: 6061, 7075
Application areas: Components of mobile diagnostic devices, structural frameworks of medical robots
Medical grade plastic
Plays an important role in the manufacturing of various medical devices, such as prostheses, syringes, catheters, and IV connectors.
The use of PEEK (polyetheretherketone): PEEK is a high-performance medical grade plastic used in spinal equipment, orthopedic components, and dental frames for implants and CNC machining.
Advantages: Biocompatibility and FDA approval, repeatable disinfection, high mechanical strength and chemical resistance, radiation resistance (does not interfere with X-rays)
Ultem(PEI), Acetal and Teflon: These engineering plastics are suitable for non implantable medical components such as handles, connectors, and diagnostic devices.
Advantages: High dimensional stability, easy processing, small tolerances, excellent chemical resistance, suitable for clean room environments
Polyethylene is a cost-effective option that provides excellent impact and corrosion resistance, as well as structural integrity during sterilization cycles. This makes it an ideal material for producing prosthetics.
On the other hand, polypropylene is known for its stress resistance, crack resistance, impact resistance, and fatigue resistance. It is commonly used to manufacture disposable syringes, oxygenator membranes, prescription bottles, connectors, and joint prostheses.
PVC is another durable, sturdy, and hard material that is highly suitable for medical applications. Commonly used in the production of hemodialysis equipment, catheters, cardiac catheters, prosthetic materials, etc.
Polycarbonate has good heat resistance and biocompatibility, making it a suitable choice for producing medical components such as IV connectors for kidney dialysis and cardiac surgery.
Overall, these medical grade plastics have a range of advantages that make them an ideal choice for various medical applications, both cost-effective and high-performance.
Our CNC customized medical parts

At Dahong Precision Machinery Company, our advanced CNC machines can achieve tolerances of up to ± 0.005 millimeters, especially our 5-axis CNC machining capability. This level of precision ensures that every medical component we produce meets the specifications required for its intended use. Whether it's custom designed bone screws or complex components of diagnostic imaging equipment, our CNC machines can carve perfect shapes with minimal error space.
We provide CNC machining services for various materials, including advanced stainless steel, titanium alloys, aluminum alloys, and engineering plastics such as PEEK (polyetheretherketone) and Teflon
You design, we manufacture! Contact us immediately! Learn more about how we can help you turn your medical device ideas into reality!
