Safety Technical Issues in Turning Machining

Sep 09, 2024

Leave a message

Turning machining is the most widely used type in the machine manufacturing industry. With a large number of lathes, a large number of personnel, a wide range of machining ranges, and a variety of tools and fixtures used, the safety technical issues of turning machining are particularly important. The key tasks are as follows:
1. Injury caused by chips and protective measures. The various steel parts processed on the lathe have good toughness, and the chips generated during turning are rich in plastic curling, with sharp edges. When cutting steel parts at high speed, red hot ground and long chips will be formed, which are extremely easy to injure people. At the same time, they often wrap around the workpiece, cutting tool and tool holder. Therefore, iron hooks should be used to clean or break them in a timely manner during work. If necessary, the machine should be stopped for cleaning, but it is absolutely not allowed to clean or break them by hand. To prevent chip damage, measures such as chip breakage, controlling chip flow, and adding various protective barriers are often taken. The measure of chip breaking is to grind a chip breaking groove or step on the turning tool; Use appropriate chip breakers and mechanical clamping tools.
2. Loading of workpieces. In the process of turning, there are many accidents where the machine tool is damaged, the tool is broken or bumped, and the workpiece falls or flies out, causing injury due to improper workpiece clamping. Therefore, in order to ensure the safe production of turning machining, special attention must be paid when installing workpieces. Suitable fixtures should be selected for parts of different sizes and shapes, and the connection between the three jaw, four jaw chuck, or specialized fixture and the spindle must be stable and reliable. The workpiece should be clamped and tightened, and a sleeve can be used to clamp large workpieces to ensure that the workpiece does not shift, fall off, or throw out when rotating at high speed and cutting under force. If necessary, top and center frames can be used to enhance the fixation. Immediately remove the handle after clamping.
3. Safe operation. Before starting work, it is necessary to thoroughly inspect the machine tool and confirm that it is in good condition before use. The clamping of workpieces and cutting tools ensures correct positioning, firmness, and reliability. During the processing, it is necessary to stop the machine when changing cutting tools, loading and unloading workpieces, and measuring workpieces. The workpiece should not be touched by hand or wiped with cotton thread during rotation. Proper selection of cutting speed, feed rate, and difficult depth is necessary, and overloading machining is not allowed. Workpieces, fixtures, and other debris shall not be placed on the headboard, knife holder, or bed surface. When using a file, move the cutting tool to a safe position, with your right hand in front and your left hand behind, to prevent the sleeves from getting caught up. The machine tool should be used and maintained by a dedicated person, and other personnel are not allowed to use it.

Send Inquiry